ASI 9018-9-41 Horizontal Surface-Mounted Baby Changing Station
The ASI 9018-9-41 is a horizontal, surface-mounted baby changing station. Its door facing and collar are 20-gauge Type 304 stainless steel with a matte-black powder-coated finish; the changing surface is FDA-approved fungus- and bacteria-resistant HDPE. It is designed for an infant up to 3½ years old and 50 lb (23 kg). ASI reports development testing to a 250 lb (113 kg) static load with minimal deflection; this is distinct from the stated infant-use limit.
Specifications and features
- Closed dimensions: 39-5/32" x 28-1/4" x 3-5/16" (995 x 718 x 84 mm).
- Open dimensions: 39-5/32" x 28-1/4" x 18-1/8" (995 x 718 x 460 mm).
- Includes a bag hook, adjustable two-part vinyl-coated safety strap with Sure-Lock latch, and bed-liner dispenser convertible to a multi-fold towel dispenser.
- A damped gas spring aids one-handed opening and closing with less than 5 lbf (22.2 N) of force. Liners or towels can be replenished by service personnel.
- ASI states compliance with the 2010 ADA Accessibility Standards and the other standards listed in its specification.
- Manufacturer-listed warranty: five years from invoice date.
Mounting and installation
Mount to a suitably reinforced wall using the supplied hardware for metal- or wood-stud walls in dry locations or general hollow-wall construction where the substrate has adequate strength. Masonry fasteners and anchors are not supplied. For installation in accordance with ASI's guidance for the 2010 ADA Accessibility Standards, set the top edge of the changing table 30-1/4" (768 mm) above finished floor. Follow the supplied installation instructions and confirm the wall can support the unit loading.
