ASI 646924AC-9 Simplicity Surface-Mounted Automatic Roll Paper Towel Dispenser and Waste Receptacle
The ASI 646924AC-9 is an AC-powered, surface-mounted combination roll towel dispenser and waste receptacle with a stainless steel collar. Its proximity sensor dispenses a preset towel length without touch. It accepts 8- or 9-inch-wide rolls up to 800 ft. long and has a 12-gallon waste capacity.
Product specifications
- Dispensing: Stub-roll capability supports continued dispensing. Three switches adjust towel length, delay, and economy settings.
- Waste: The 12-gallon receptacle is removable and has internal hooks for a reusable vinyl liner (not supplied) or disposable PVC liner bags (by others).
- Construction: Cabinet, frame, and waste container are 22-gauge Type 304 stainless steel with a satin finish.
- Dimensions: 17-1/4 in. W × 56 in. H × 10-1/4 in. D.
- Power: The supplied low-voltage adapter provides 6 VDC at 2 A. An LED indicates sensing and operation.
- Warranty: One year from invoice date.
Installation and servicing
Mount through the concealed holes using #10 self-threading screws (not supplied). Slide the stainless steel collar onto the cabinet back before wall installation. Provide code-approved wiring and a duplex outlet inside the cabinet; wiring and outlet are by others. The supplied adapter plugs into the outlet. ASI's installation guidance for the cited accessibility standards places the bottom edge of the towel dispenser door no higher than 48 in. above the finished floor; confirm project requirements for the installation.
To refill, unlock the door and replace an empty or partially used roll. When loading a new full roll, move the existing partial roll to the stub-roll position for continued feeding. Empty the receptacle as maintenance needs require; its retainer helps prevent unauthorized removal.
