ASI 64696AC-9 Automatic Roll Paper Towel Dispenser and Waste Receptacle
The ASI 64696AC-9 is a surface-mounted, AC-powered combination unit for touchless towel dispensing and waste collection. It holds a standard roll and a stub roll, with automatic changeover to the main roll when the stub is used, provided the feed tabs are properly engaged.
Specifications
- Roll capacity: one standard roll up to 8 inches in diameter, 8 inches wide, and 800 feet long, plus one 8-inch-wide stub roll up to 4 inches in diameter.
- Waste receptacle capacity: 9.9 gallons (37.3 L).
- Overall dimensions: 16-1/16 inches W x 41-1/4 inches H x 10-1/4 inches D.
- Cabinet and frame: 20-gauge Type 304 stainless steel with satin finish; supplied surface-mounting collar.
- Power: 110–240 VAC, 50/60 Hz through the supplied AC adapter. The manufacturer identifies the adapter as C-UL-US and CE approved.
- Surface mounted; towel opening height and mounting position should be planned before installation.
Installation and operation
The manufacturer specifies #10 self-threading mounting screws (by others) and power entry at the location shown in the spec sheet. Manufacturer installation guidance for the 2010 ADA Accessibility Standards calls for installing the unit with the top edge of the towel opening no higher than 48 inches above finished floor; this is installation guidance, not a blanket compliance guarantee.
At each sensor activation, the unit dispenses the towel length selected by the owner using the length, delay, and paper-saver switches. To refill, unlock the door and replace the roll; a full roll can be loaded while a partial roll is transferred to the stub-roll position. Replenish towels and empty the waste receptacle according to maintenance needs.
