ASI 204692AC-9 Roval Surface-Mounted Automatic Roll Paper Towel Dispenser and Waste Receptacle
The ASI 204692AC-9 is a surface-mounted, AC-operated automatic roll towel dispenser with a removable 17.8-gallon (67.2 L) waste receptacle and stainless steel collar. Its satin-finish cabinet is 18-gauge Type 304 stainless steel. It accepts roll towels up to 800 feet (244 m) long; owners set the towel length, delay, and economy switches.
Key specifications
- Overall dimensions: 17-5/8 inches wide x 56-5/16 inches high x 11-11/16 inches deep.
- Waste capacity: 17.8 gallons (67.2 L); removable receptacle.
- Mounting: Surface-mounted with the stainless steel -9 collar.
- Power: Supplied adapter accepts 110–240 VAC, 50/60 Hz and provides 6 VDC at 2 A.
- Construction: Satin-finish Type 304 stainless steel with a concealed, multi-staked piano hinge.
Operation and installation
When hands enter the sensor zone, the unit dispenses one selected towel length at a time. The owner sets length, delay, and economy using the three-position switches. When reloading, a full roll can be loaded while the existing partial roll is transferred to the stub-roll position. Refill the towel supply through the unlocked door and empty the waste receptacle according to maintenance needs.
Provide adequate wall reinforcement; suitable anchors, #10 self-threading mounting screws, code-approved cable or conduit, and the 15 A circuit breaker are by others. The adapter plugs into a duplex outlet inside the cabinet. ASI’s guidance for ICC/ANSI A117.1-2003 and the 2010 ADA Accessibility Standards calls for the top edge of the towel opening to be no higher than 48 inches above finished floor (AFF) only when clear-floor reach access is provided. Local requirements may specify a lower maximum.
