ASI 204692AC Roval Recessed Automatic Roll Paper Towel Dispenser
The ASI 204692AC is an AC-powered, no-touch recessed roll towel dispenser with an integrated removable 17.8-gallon waste receptacle. It accepts rolls up to 800 feet; owners set towel length, delay, and paper-saver switches. The cabinet is 18-gauge Type 304 stainless steel with a satin finish.
Key specifications
- Overall dimensions: 17-3/8 inches wide x 56-1/16 inches high x 11-11/16 inches deep.
- Minimum rough wall opening: 16 inches wide x 54-3/4 inches high x 10-1/4 inches deep.
- Supplied low-voltage adapter: 110–240 VAC, 50/60 Hz input; 6 VDC at 2 A output.
- Power entry is available at the top, left side, or rear; the adapter plugs into a duplex outlet inside the cabinet.
- Provide code-approved cable or conduit and a 15 A circuit breaker; these are by others. Adequate in-wall reinforcement is required in drywall, with suitable anchors and #10 mounting screws by others.
Towels dispense one length at a time when hands enter the sensor zone. Staff refill the roll through the unlocked door and empty the waste receptacle manually as maintenance needs require. A full roll can be loaded while a partial roll is transferred to the stub-roll position.
Mounting guidance
ASI’s installation guidance for ICC/ANSI A117.1-2003 and the 2010 ADA Accessibility Standards specifies a maximum 48-inch AFF height to the top edge of the towel opening only when clear-floor reach access is provided. Local requirements may set a lower maximum, such as 40 inches AFF.
