ASI 046924AC-9 Surface-Mounted Automatic Roll Paper Towel Dispenser and Waste Receptacle
The ASI 046924AC-9 is a surface-mounted automatic roll paper towel dispenser with a 12-gallon (45.4 L) waste receptacle. Its sensor activates dispensing when hands enter the sensor zone.
Roll capacity and operation
- Holds one 8-inch-wide standard towel roll up to 8 inches in diameter and 800 feet long, plus one 8-inch-wide stub roll up to 4 inches in diameter.
- Dispenses a 12-inch (305 mm) towel length per activation and has an internal tear-off bar for towel pull-out.
- A locking door helps prevent unauthorized access and roll removal. The lock is keyed alike to other ASI washroom equipment.
- Cabinet and frame are 22-gauge Type 304 stainless steel alloy 18-8; the door is 18-gauge of the same grade. Exposed surfaces have a No. 4 satin finish.
- Uses the supplied C-UL-US- and CE-approved internal low-voltage adapter: 110–240 V AC, 50/60 Hz input and 5 V DC at 1 A output.
Installation
Mount to suitable wall preparation using No. 10 self-tapping screws (by others) through the concealed mounting holes. Manufacturer installation guidance specifies a maximum height of 48 inches (1219 mm) above the finished floor to the bottom edge of the towel dispenser door. The adapter is supplied with the unit.
