ASI 046921A-6 Automatic Roll Towel Dispenser and Waste Receptacle
This proximity-sensing, no-touch unit dispenses towels one at a time in a preset length from an 8- or 9-inch-wide standard roll up to 800 feet long. It has stub-roll capability and a 12-gallon (45.4 L) waste capacity. A full roll can be loaded while a partial roll is in use; transfer the partial roll to the stub-roll position so dispensing continues.
The unit is semi-recessed with a stainless steel collar and runs on four D-size batteries (not included). The cabinet, frame, and waste container are 22-gauge Type 304 stainless steel; the door is 18-gauge Type 304 stainless steel. Exposed surfaces have a satin finish. The locking door and waste-container retainer prevent unauthorized access and removal. Refill by unlocking the door; replenish towels, replace batteries, and empty the waste container according to maintenance needs. An LED indicates sensing and battery condition.
Installation
Minimum rough wall opening: 16-3/8 inches W x 55 inches H x 4-1/4 inches D. Mount in the wall recess through the concealed holes using #10 self-threading screws (by others). For manufacturer guidance referencing the 2010 ADA Accessibility Standards, install with the bottom edge of the towel dispenser door no more than 48 inches above the finished floor.
