ASI 8020 Sav-Haf Surface-Mounted Toilet Tissue Holder
The ASI 8020 is a surface-mounted holder for one standard-core toilet tissue roll up to 5 inches in diameter. Its snap-lock mechanism and hinged arm secure the roll, which cannot be removed until the tissue is exhausted.
Specifications
- Capacity: One standard-core roll, up to 5 inches (127 mm) in diameter.
- Material and finish: 1/8-inch (3 mm) clear anodized aluminum with a satin finish.
- Dimensions: 5-1/8 inches (130 mm) wide × 2 inches (51 mm) high × 3-1/8 inches (79 mm) deep.
- Mounting: Surface-mounted to a wall or partition with supplied #10 self-threading screws.
- Warranty: One year from date of invoice.
Refilling and installation
After the roll is depleted, remove its core and pull the hinged side forward to release the snap lock; swing the hinged arm out and around to service the holder. For installation intended to meet the 2010 ADA Accessibility Standards, the manufacturer specifies a roller centerline between 19 inches minimum and 44 inches maximum above the finished floor, with the leading edge of the roll no more than 36 inches from the back wall behind the commode.
