ASI 64696 Recessed Manual Roll Towel Dispenser and Waste Receptacle
The ASI 64696 is a recessed, lever-operated towel dispenser with an integrated 9.4-gallon waste receptacle, suited to restroom installations with the specified wall-cavity depth. Its auto-feed arrangement supports a full roll taking over after a partial roll is used.
Capacity and operation
- Dispenses one standard roll up to 8 inches in diameter, 8 or 9 inches wide, and 800 feet long, plus a stub roll up to 4 inches in diameter.
- The supplied adjustment pin limits lever stroke to adjust towel feed length.
- A full roll can start feeding automatically after the existing partial roll is used; the partial roll can be transferred to the stub-roll position.
- The waste receptacle holds 9.4 gallons (36 L). Replenish towels and empty the receptacle manually as needed.
- Type 304 stainless steel construction with a satin finish; a locking full-face door covers both compartments.
Dimensions and installation
Overall dimensions are 16-1/16 inches W x 41-1/4 inches H x 9-5/8 inches D. The minimum rough wall opening is 14-5/8 inches W x 39-3/4 inches H x 9-1/4 inches D. Confirm the wall cavity meets these requirements before selecting this recessed model.
Install in the wall recess with #10 self-threading screws through the concealed mounting holes; screws are by others. For installation intended to meet the 2010 ADA Accessibility Standards, ASI specifies a maximum height of 48 inches above the finished floor to the towel feed lever.
