ASI 64696-9 Manual Roll Towel Dispenser and Waste Receptacle
The surface-mounted ASI 64696-9 uses a manual lever to dispense standard towel rolls 8 or 9 inches wide and up to 800 feet long. It supports stub-roll dispensing and has a 9.4-gallon (36-liter) waste receptacle.
Product specifications
- Operation: Lever feed; a supplied pin limits the lever stroke to adjust towel feed length.
- Roll capacity: Standard rolls up to 800 feet long; the unit supports a partial roll in the stub-roll position.
- Waste capacity: 9.4 gallons (36 liters); removable waste receptacle.
- Construction: Type 304 stainless steel with satin finish and a stainless steel surface-mounting collar.
- Dimensions: 16-1/16 in. W × 41-1/4 in. H × 9-5/8 in. D.
- Access: A locking full-face door covers the compartments.
Installation and servicing
Mount to the wall through the concealed mounting holes using #10 self-threading screws (by others). Install the surface-mount collar on the cabinet before mounting, following the collar instructions. ASI’s installation guidance for the 2010 ADA Accessibility Standards specifies a maximum height of 48 in. above the finished floor to the towel dispenser feed lever. To refill, unlock the door and replace an empty or partially used roll. When reloading with a full roll, transfer the partial roll to the stub-roll position so the unit can continue feeding from it. Replenish towels and empty the waste receptacle as maintenance needs require.
