ASI 3501-30P 30-Inch Straight Grab Bar
The ASI 3501-30P is a 30-inch straight grab bar for exposed-flange mounting. Its 1-1/2-inch-diameter peened Type 304 stainless steel tube provides the manufacturer-described non-slip surface; the exposed flanges have a satin finish.
Specifications
- Bar length: 30 inches; tube: 1-1/2-inch outside diameter and 18 gauge.
- Tube material: Type 304 stainless steel.
- Exposed flanges: Type 304 stainless steel, 3 inches in diameter and 1/8 inch thick, with a satin finish.
- Each flange has three drilled and countersunk mounting holes.
Mounting guidance
Use the bar as a template to mark and pre-drill the mounting holes. ASI specifies three No. 10 self-tapping flat-head or oval-head screws per flange, or another suitable fastener system; screws are not provided. Provide appropriate anchoring and wall backing before finishing the wall, based on site conditions and applicable requirements. Anchors are available from ASI and must be specified separately. For its cited 2010 ADA Accessibility Standards, ASI's installation guidance specifies a top-of-bar height of 33 to 36 inches above the finished floor; mounting and the fastener system affect performance.
