ASI 3401-30P 30-Inch Peened Straight Grab Bar
The ASI 3401-30P is a 30-inch straight grab bar for installations calling for exposed mounting flanges and a peened surface. Its 1-1/4-inch Type 304 stainless steel tube has a satin finish; mounting fasteners are not included.
Verified specifications
- Tube: 1-1/4-inch outside diameter, 18-gauge Type 304 stainless steel.
- Finish and surface: satin finish with the -P optional peened surface, which ASI identifies as non-slip.
- Flanges: exposed, 3 inches in diameter and 1/8 inch thick.
- Mounting holes: three countersunk holes per flange, sized for #10 flat-head or oval-head screws or 1/4-inch pan-head screws.
Mounting guidance
Screws are not provided, and ASI anchors must be specified separately. Choose a fastener system for the wall conditions and provide appropriate anchoring and backing before finishing the wall; the mounting system affects installed performance. ASI's installation guidance for the cited 2010 ADA Accessibility Standards specifies the top of the bar 33 to 36 inches above the finished floor. This manufacturer guidance is not a blanket compliance guarantee.
