ASI 3501-18 Straight Grab Bar, 18-Inch, Exposed Flange
The ASI 3501-18 is an 18-inch straight grab bar for exposed wall mounting, distinguished by its 1-1/2-inch Type 304 stainless steel tubing and satin finish.
Specifications
- Length: 18 inches; tubing: 1-1/2-inch outside diameter and 18 gauge.
- Material: Type 304 stainless steel; exposed surfaces have a satin finish.
- Two exposed flanges are 3 inches in diameter and 1/8 inch thick.
- Each flange has three drilled and countersunk mounting holes.
- Mounting screws and anchors are not included.
Mounting guidance
Use three suitable fasteners per flange. Provide appropriate anchoring and wall backing for site conditions before finishing the wall; the fastener system and wall attachment are critical to grab-bar strength. ASI's installation guidance for positioning under the 2010 ADA Accessibility Standards places the top of the bar 33 to 36 inches above the finished floor. This manufacturer guidance does not by itself establish compliance.
