ASI 3413-P Peened Swing-Up Grab Bar
The ASI 3413-P is a surface-mounted swing-up grab bar with a peened gripping area, Type 304 stainless steel construction, and a satin finish. Its 1-1/4-inch-diameter, 18-gauge tubing is operable with one hand.
Product details
- The peened area is specified for better gripping.
- The bar has a solid axle and adjustable balance tension controlled by a hex-head clamp bolt.
- A top arm stop bumper provides a stop when the bar is raised; a plastic end cap provides smooth, solid contact with the back plate when lowered.
Installation and maintenance
The unit is surface mounted. Concealed anchor plates or blocking and appropriate mounting hardware are required but are not supplied; fasten the wall plate through all seven mounting holes. Ensure the mounting configuration complies with local building codes. For adult use under ASI’s installation guidance for the 2010 ADA Accessibility Standards, position the top of the horizontal bar 33 to 36 inches above the finished floor.
Lower the bar manually to the horizontal position for support and raise it for departure. Periodically inspect safe operation and adjust tension as needed, since use may loosen it over time. For cleaning, use a mild abrasive cleanser on a damp non-metallic abrasive pad, rub in the direction of the grain, rinse well, and wipe dry. The product has a one-year warranty from the invoice date.
