ASI 204523A Roval Recessed Automatic Roll Paper Towel Dispenser
This recessed, touch-free dispenser is fabricated from 22-gauge Type 304 stainless steel with a satin finish, curved front, and concealed multi-staked piano hinge. It dispenses one towel length when hands enter the sensor zone. The owner sets towel length, delay, and economy using three three-position switches. It accommodates roll towels up to 800 ft.
When a roll is depleted, the unit can start dispensing from a newly loaded full roll; a remaining partial roll can be transferred to the stub-roll position so feeding continues. Refill by unlocking the door and replacing the roll. Towel supply is replenished and the four D-size batteries are replaced manually; batteries are not included. An LED indicates sensing and battery condition, and the locking door prevents unauthorized access and roll removal.
Recess and installation
Plan for a rough wall opening of 15-3/4 in. W x 26 in. H x 10 in. D minimum. Provide adequate in-wall reinforcement in drywall construction. Mount with #10 self-threading screws through the concealed mounting holes; screws and appropriate anchors for other wall conditions are by others. For the manufacturer-cited accessibility standards, install with the towel-slot centerline no more than 48 in. above the finished floor. Local codes may require the top of the towel opening to be no higher than 40 in. AFF; for general utility, the manufacturer specifies the top of the opening between 49 and 56 in. AFF.
