ASI 204523A-6 Roval Semi-Recessed Automatic Roll Paper Towel Dispenser
This battery-operated dispenser has a Type 304 stainless steel satin-finish body and a 6-inch semi-recessed collar. Towels dispense one length at a time when hands enter the sensor zone, until supply is depleted. Set towel length, delay and economy using the three three-position switches. It accepts roll towels up to 800 ft. (244 m).
Provide a rough wall opening of at least 15-3/4 in. W x 26 in. H x 4 in. D. For drywall, provide adequate in-wall reinforcement; for other wall conditions, use appropriate anchors. Mount with #10 self-threading screws through the concealed mounting holes; screws and anchors are by others. ASI's guidance for the cited accessibility standards places the towel-slot centerline no more than 48 in. above finished floor; local requirements may differ.
Loading and maintenance
Unlock the door to replace an empty or partially used roll. A full roll can be loaded before the existing partial roll is exhausted: transfer the partial roll to the stub-roll position, and the dispenser will continue feeding and automatically start the full roll when the partial roll is finished. The unit uses four D-size batteries, not included. Replenish towels and replace batteries manually as needed. The LED indicates sensing and battery condition, and the locking door prevents unauthorized access and roll removal.
