ASI 0600-2818 Inter-Lok Angle Frame Plate Glass Mirror, 28" W x 18" H
The ASI 0600-2818 is a 28" wide x 18" high, surface-mounted mirror with 1/4" plate glass and a satin-finish Type 304 stainless steel interlocking angle frame. The 3/4" x 5/8" roll-formed, 18-gauge frame has heliarc-welded corners that are ground and polished smooth. A concealed hanging bracket locks onto the top and bottom of the frame with tamper-proof set screws.
Specifications
- Mirror: #1 quality, 1/4" plate glass, silver coated and hermetically sealed.
- Frame: 18-gauge Type 304 (18-8) stainless steel with a uniform satin finish.
- Back plate: one piece, attached to the frame with a theft-resistant locking device.
- Warranty: warranted against silver spoilage for 15 years from the invoice date.
Installation guidance
Install the bracket level and plumb using #10 self-threading screws (by others), hang the mirror, and tighten the locking screws at the top and bottom. ASI’s installation guidance for the 2010 ADA Accessibility Standards and 2015 ABA Standards specifies that the bottom edge of the reflecting surface should be no higher than 40" above finished floor; confirm project requirements and installation conditions.
