ASI 0457 Recessed Paper Towel Dispenser
The ASI 0457 is a manual pull-type, recessed dispenser for smaller, lower-traffic washrooms. It holds 350 C-fold or 475 multi-fold towels and has a Type 304 satin-finish stainless steel cabinet.
Specifications
- Capacity: 350 C-fold or 475 multi-fold towels.
- Overall dimensions: 12-3/4 inches wide x 17-1/4 inches high x 4-1/4 inches deep.
- Minimum rough-wall opening: 11-1/4 inches wide x 15-3/4 inches high x 4 inches deep.
- Dispensing: Towels self-feed until the supply is depleted; the fully hemmed slot edge supports snag-free dispensing.
- Access and construction: Type 304 stainless steel with satin finish; key-operated door and manual pull operation.
Installation and refilling
Recess the unit in the wall and secure it through the concealed mounting holes with #10 screws (not included). ASI's installation guidance for the 2010 ADA Accessibility Standards calls for the towel-slot centerline to be no more than 48 inches above the finished floor; its CalDAG guidance specifies 40 inches. Check the project requirements and rough opening before installation.
To refill, unlock and open the door, then load folded towels from the bottom through the two push-up flaps. For a partial-load refill, interleave the leading edge of a multi-fold towel with the trailing edge of the existing stack, or load C-fold towels with the flaps facing down.
