ASI 0357 Horizontal Surface-Mounted Foam Soap Dispenser
The ASI 0357 is a manual push-button foam soap dispenser for horizontal surface mounting. It has a 40 fl. oz. (1.2 L) capacity, Type 304 stainless-steel construction with a satin finish, an all-purpose valve, and a tamper-resistant refill indicator. The hinged top refill door opens with the supplied special key.
Capacity, soap, and servicing
- Use soap with viscosity of 1–100 mPa·s (cP) and pH 5.5–8.5. The manufacturer advises avoiding soaps containing reportable salts, chlorides, or alcohols.
- Open the hinged top refill door with the supplied special key to replenish the tank manually. Soap continues to feed until the level falls below the valve intake port.
- Dimensions are 8-3/16 × 4-13/16 × 3-15/16 in. (208 × 122 × 100 mm); spout projection is 23/32 in. (18 mm).
Mounting guidance
Mount the supplied wall plate to the wall or partition with screws supplied by others; secure the dispenser to the interlocking wedge bracket with the supplied locking screw through the refill door. ASI recommends a general-utility installation at 42 in. (1066 mm) above finished floor or at least 6 in. (152 mm) above a washbasin. For installations intended to follow the 2010 ADA Accessibility Standards or 2015 ABA Standards, the manufacturer specifies a valve-button centerline no higher than 48 in. (1219 mm) above finished floor; confirm applicable project requirements.
ASI lists a one-year warranty from the invoice date.
