ASI 0345 Horizontal Liquid Soap Dispenser, Surface-Mounted
The ASI 0345 is a surface-mounted horizontal liquid soap dispenser with a 40 fl. oz. (1.2 L) capacity. Its Type 304 stainless steel body has a satin finish; a manual push button operates the all-purpose valve, and the tamper-resistant refill indicator helps show when the supply needs attention.
Specifications and operation
- Capacity: 40 fl. oz. (1.2 L); horizontal, surface-mounted configuration.
- Body: Type 304 stainless steel with satin finish.
- Dimensions: 8-3/16 inches W x 4-13/16 inches H x 3-15/16 inches D; spout projection is 23/32 inch.
- Use liquid soap with viscosity of 100–3,500 cP and pH of 5.5–8.5. The manufacturer advises avoiding soaps containing reportable salts, chlorides, or alcohols.
- Open the hinged top refill door with the supplied special key to replenish the tank manually. The tank continues feeding until the soap level falls below the valve intake.
- Manufacturer warranty: one year from the invoice date.
Mounting guidance
Install the supplied wall mounting plate with screws (not included); the dispenser engages an interlocking wedge bracket and is secured with the supplied locking screw through the refill door. For general utility, the manufacturer recommends mounting at 42 inches above the finished floor or at least 6 inches above the washbasin. The manufacturer's guidance for the 2010 ADA Accessibility Standards and 2015 ABA Standards is to install the valve-button centerline no higher than 48 inches above the finished floor; this is installation guidance, not a blanket compliance determination.
