ASI 0199-2-41 TURBO ADA Surface-Mounted High-Speed Hand Dryer, 208-240V

The ASI 0199-2-41 is a 208–240V AC, matte-black surface-mounted hand dryer for touch-free restroom use. Its infrared sensor starts operation automatically, and ASI specifies drying in under 15 seconds, with owner-adjustable air speed and temperature.

Specifications

• Electrical service: 208–240 VAC, 50/60 Hz; 5.2 A maximum and 1,000 W.
• Motor: 0.67 HP, adjustable 16,000–29,000 rpm, brush type with dual ball bearings; the motor and heating element have auto-resetting thermal protection.
• Airflow: 63.6 CFM (108 m³/h); air speed is owner-adjustable.
• Dimensions: 10-5/8 × 8-15/32 × 4 in. (270 × 215 × 102 mm); surface mounted.
• Finish and construction: matte-black powder-coated 18-gauge steel.
• Sound level: 68.9 dB-A minimum and 74.3 dB-A maximum, measured at 2 m.
• Automatic 60-second shutoff; the dryer also stops when hands leave the sensor zone. Five-year warranty from invoice date.

Installation and placement

ASI identifies this model as ADA compliant and provides installation-height guidance: position the bottom of the sensor lens no higher than 48 in. above finished floor for unobstructed reach, or 44 in. where forward reach over an obstruction with a depth greater than 20 in. and less than 25 in. is the only access. For general utility, ASI recommends a sensor-lens height of 44–54 in. Electrical service must be connected before the cover is installed; the manual specifies installation by a qualified electrician. Follow the installation guide for site conditions.

ASI 0199-2-41 TURBO ADA Hand Dryer Spec Sheet
ASI TURBO ADA Hand Dryer Operating Instructions