ASI 0199-2-00 TURBO ADA Surface-Mounted High-Speed Hand Dryer
The ASI 0199-2-00 is a white, surface-mounted automatic hand dryer for facilities with a 208–240 VAC supply. Its infrared sensor starts drying without touch, and ASI specifies a drying time of less than 15 seconds. The cover is white porcelain enamel on steel.
Model 0199-2-00 specifications
- Electrical: 208–240 VAC, 50/60 Hz; 5.2 A maximum; 1,000 W maximum.
- Air and drying: 63.6 CFM airflow; owner-adjustable air speed and temperature; less than 15-second drying time.
- Operation: Infrared automatic activation with auto-resetting thermostat; shuts off when hands leave the sensor zone or after the 60-second timer limit.
- Construction and size: White porcelain enamel on steel; surface mounted; 10-5/8 × 8-15/32 × 4 in. (270 × 215 × 102 mm).
- Other ratings: Drip-proof IP24 design; sound pressure 68.9 dB-A minimum to 74.3 dB-A maximum at 2 m; five-year warranty from invoice date.
Installation and upkeep
Confirm the site provides a 208–240 VAC circuit before selection; the 0199-2-00 is not the 110–120 V or 277 V version. ASI specifies installation by a qualified electrician. Its installation guidance says to position the bottom of the sensor lens no higher than 48 in. (1219 mm) above finished floor for unobstructed adult reach, or 44 in. (1118 mm) where the specified forward reach over an obstruction applies. Follow the supplied mounting template and installation guide for site conditions. For cleaning, disconnect power, remove lint from inside, and wipe the cover with a damp cloth and mild cleaning solution; do not soak or use abrasives.
ASI identifies this model as ADA-compliant; accessibility depends on installation and site conditions.
ASI 0199-2-00 TURBO ADA Hand Dryer Spec Sheet
ASI TURBO ADA Hand Dryer Operating Instructions
