ASI 7387 Wall-Mounted Toilet Brush and Holder
The ASI 7387 is a wall-mounted toilet brush and holder with a satin-finish Type 304 stainless steel storage cylinder, handle and round splash guard. It includes one PVC brush with a polypropylene shaft and a drip cup at the bottom of the cylinder.
Product details
- Construction: 22-gauge satin-finish stainless steel tube handle, round splash guard and storage cylinder.
- Dimensions: 15-1/2 inches from the bottom of the base to the top of the handle; projects 5-1/8 inches from the wall.
- Brush handle has a built-in splash guard; the drip cup can be periodically cleaned with the brush.
Installation and maintenance
Allow 12 inches of vertical clearance above the holder body to remove and return the brush. The manufacturer recommends mounting at 32 inches above finished floor and specifies a maximum 48-inch height to the top of the handle for installation guidance referencing the 2010 ADA Accessibility Standards. Two M4x39 (#6 x 1-1/2-inch) pan-head self-tapping screws and plastic wall anchors are provided; use other suitable mounting hardware if needed for the wall conditions. A 2.5 mm hex L-key is provided to secure the set screw to the wall bracket. Periodically clean the internal drip cup and brush on a cycle determined by maintenance needs. The manufacturer’s warranty is one year from the invoice date.
