ASI 7305-41 Single Toilet Tissue Holder, Matte Black, Surface Mounted
The ASI 7305-41 is a surface-mounted single-roll toilet tissue holder for a standard-core 1800-sheet roll. It combines a matte black type 304 stainless steel body with a chrome-plated roller and concealed wall-mounting bracket.
Product details
- Holds one standard-core toilet tissue roll.
- Type 304 stainless steel with a matte black powder-coated finish; chrome-plated roller.
- Dimensions: 7-3/4 inches wide × 2 inches high × 3-7/8 inches deep.
- Includes 18-gauge steel mounting plates. #10 self-threading screws or other suitable mounting hardware are by others and should suit the wall conditions.
- Optional theft-resistant spindle guard: ASI model R-009, ordered separately.
Mounting and operation
Secure the mounting plates to suitable prepared wall mountings, hang the post-and-flange assemblies on the plates, and tighten the setscrews. The spring-loaded spindle rotates freely and holds the roll until its core is removed. ASI's installation guidance citing ICC/ANSI A117.1-2003 and the 2010 ADA Accessibility Standards gives positioning of 7–9 inches in front of the toilet and 15–48 inches above finished floor. These measurements are installation guidance, not a certification or guarantee of compliance; verify project-specific requirements before installation. For general utility, ASI recommends a 30-inch centerline height and 14 inches from the front of the commode to the dispenser centerline.
