ASI 7305-2S Double-Roll Toilet Tissue Holder
The ASI 7305-2S is a surface-mounted, satin-finish double toilet tissue holder for commercial restrooms. It holds two standard-core rolls up to 6 inches in diameter, including 1800-sheet rolls, and has chrome-plated rollers.
Specifications
- Type 304 stainless steel with a satin finish and chrome-plated rollers.
- Holds two standard-core rolls, up to 6 inches in diameter; manufacturer specifies 1800-sheet standard-core rolls.
- Dimensions: 13-1/2 inches W x 2 inches H x 3-7/8 inches D.
- Heavy-gauge concealed wall bracket; included mounting plates are 18-gauge steel.
- Spring-loaded spindles revolve freely and retain rolls until their cores are removed.
Mounting and placement
Mount the plates through their provided holes using #10 self-threading screws into suitable prepared mountings, or other hardware appropriate to the wall. Screws and wall mounting hardware are by others. Hang the post and flange assemblies on the plates and tighten the setscrews. The manufacturer’s cited ICC/ANSI A117.1-2003 and 2010 ADA installation guidance specifies a roller centerline 19 to 44 inches above finished floor and a dispenser centerline no farther than 33 inches from the back wall behind the commode, or 7 to 9 inches from the front of the commode. For general utility, the manufacturer recommends a 30-inch roller centerline height and 14 inches from the commode front to the dispenser centerline. This is manufacturer installation guidance, not a blanket compliance determination. The R-009 theft-resistant spindle guard is available separately.
