ASI 3801-42-41 42-Inch Straight Grab Bar
The ASI 3801-42-41 is a 42-inch, surface-mounted matte black grab bar for restroom installations. It has a smooth 1-1/2-inch-OD grip, distinguishing it from textured versions, and a snap-on cover that conceals the mounting-flange screws.
Product specifications
- 42-inch length; 1-1/2-inch outside-diameter, 18-gauge Type 304 stainless steel tubing.
- Smooth surface and matte black powder-coated finish.
- Type 304 stainless steel mounting flange: 3-1/8 inches in diameter and 1/8 inch thick, with two screw holes and three locking dimples.
- Type 304 stainless steel snap-on cover: 22 gauge and 3-3/16 inches in diameter.
Installation and care
Fasteners are by others. Install using two #10 self-threading flat- or oval-head screws, or another suitable fastener system. Provide appropriate anchoring and wall backing for the mounting conditions before wall finishing. ASI's installation guidance for 2010 ADA Accessibility Standards places the top of the bar 33 to 36 inches above the finished floor; appropriate mounting and anchoring are critical. Anchors are available from ASI and must be specified separately.
Clean accessible surfaces with mild liquid soap, then wipe and dry. Do not use abrasive powders or pads, toilet or tile cleaners, solutions containing more than 1% ammonia, acids, lye, or enzyme-containing solutions.
