ASI 3801-24P 24-Inch Straight Stainless Steel Grab Bar
The ASI 3801-24P is a 24-inch straight grab bar for installations requiring a 1-1/2-inch outside-diameter bar. Its peened surface is the manufacturer's optional non-slip finish, and snap-on covers conceal the mounting flanges and screws.
Product specifications
- Tube: 1-1/2-inch O.D., 18-gauge Type 304 stainless steel.
- Surface and finish: peened option with satin finish on exposed surfaces.
- Concealed flange: 1/8 inch thick and 3-1/8 inches in diameter, with two screw holes and three locking dimples.
- Snap-on cover: 22-gauge stainless steel, 3-3/16 inches in diameter, with a satin finish.
Mounting guidance
Use the bar as a template to mark and pre-drill the mounting holes. The manufacturer specifies two No. 10 self-tapping pan-head screws and flat washers per flange, or another suitable fastener system; fasteners and washers are by others. Provide appropriate anchoring and wall backing before finishing the wall, based on site conditions, local requirements, and project plans. ASI anchors are available but must be specified separately. For its cited 2010 ADA Accessibility Standards, ASI's installation guidance places the top of the bar 33 to 36 inches above the finished floor; verify applicable project and code requirements. The mounting system and installation affect performance.
