ASI 3401-36P 36-Inch Straight Grab Bar with Exposed Flanges
The ASI 3401-36P is a 36-inch straight grab bar for exposed wall mounting. Its 1-1/4-inch Type 304 stainless steel tube has a peened, non-slip surface; exposed surfaces have a satin finish.
Verified specifications
- Length: 36 inches; tube outside diameter: 1-1/4 inches.
- Tube: Type 304 stainless steel, 18-gauge wall.
- Flanges: 3 inches in diameter and 1/8 inch thick, with three countersunk mounting holes per flange.
- Peened surface is the manufacturer's optional non-slip surface treatment.
Mounting and installation
Use the bar as a template to mark and pre-drill mounting holes. Mounting screws are not provided; ASI specifies suitable screws or another fastener system selected for the wall conditions. Provide appropriate anchoring and backing before wall finishing, since wall mounting and fastener sizing are critical to the installed system. ASI's installation guidance for the 2010 ADA Accessibility Standards specifies a bar-top height of 33 to 36 inches above the finished floor; installation and anchorage must be evaluated for the specific project.
