ASI 0625-2436 Stainless Steel Channel Frame Mirror with Shelf

This 24 x 36-inch surface-mounted mirror has a one-piece, 20-gauge Type 304 satin-finish stainless steel channel frame measuring 1/2 x 1/2 x 1/2 inch. The channel encases the mirror and backing and forms tight mitered corners. The standard plate-glass mirror is warranted against silver spoilage for 15 years from the invoice date. Its 18-gauge satin-finish stainless steel shelf is 5 inches deep, welded to the face frame, and has returned and hemmed edges.

Mounting

Install the two wall brackets level and plumb using only #8 or #10 pan-head screws (by others). Start the theft-resistant locking screw, supplied separately and taped to the mirror back, before hanging the mirror on the brackets; then tighten it at the bottom. Manufacturer guidance for the cited 2010 ADA Accessibility Standards and 2015 ABA Standards says the bottom edge of the reflecting surface should be no higher than 40 inches above the finished floor.

ASI 0625-2436 Mirror Spec Sheet