ASI 0625-2430 Channel Frame Mirror with Shelf

This 24 x 30 inch surface-mounted mirror has a one-piece, roll-formed 20-gauge Type 304 stainless steel channel frame with a satin finish. The 1/2 x 1/2 x 1/2 inch channel encases the mirror and backing, forming tight mitered corners. Standard plate/float glass is warranted against silver spoilage for 15 years from the invoice date. An 18-gauge satin-finish stainless steel shelf is welded to the face frame; it is 5 inches deep and has returned, hemmed edges.

The mirror hangs on wall brackets and is secured with a theft-resistant locking screw. ASI specifies #8 or #10 pan-head wall screws, which are by others; the locking screw is supplied separately, taped to the mirror back, and should be started before hanging. ASI's installation guidance says the bottom edge of the reflecting surface should be no higher than 40 inches above the finished floor for the cited 2010 ADA and 2015 ABA standards.

ASI 0625-2430 Mirror Spec Sheet