ASI 0600-3024 Inter-Lok Angle Frame Mirror
This 30" W x 24" H surface-mounted mirror has a plate-glass reflective surface and a satin-finish frame made from 3/4" x 5/8" roll-formed, 18-gauge Type 304 (18-8) stainless steel angle. The frame corners are heliarc welded, then polished smooth. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a one-piece back plate attaches to the frame with a theft-resistant locking device.
Installation
Install the bracket level and plumb using #10 self-threading screws (by others). Hang the mirror on the bracket and tighten the locking screws at the top and bottom. Manufacturer guidance for the 2010 ADA Accessibility Standards and 2015 ABA Standards states that the bottom edge of the reflecting surface should be no higher than 40" above finished floor; confirm the applicable requirements for the installation.
