ASI 0600-2416 Inter-Lok Angle Frame Plate Glass Mirror, 24" W x 16" H
This surface-mounted mirror has a plate-glass reflective surface and a 3/4" x 5/8" roll-formed, 18-gauge Type 304 stainless steel angle frame. The frame corners are heliarc-welded, ground, and polished to a uniform satin finish. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a one-piece back plate is attached with a theft-resistant locking device.
Mounting
Install the bracket level and plumb using #10 self-threading screws, which are by others. Hang the mirror on the bracket and tighten the locking screws at the top and bottom. ASI's installation guidance for 2010 ADA Accessibility Standards and 2015 ABA Standards calls for the bottom edge of the reflecting surface to be no higher than 40" above the finished floor; this is manufacturer guidance, not a determination of project compliance.
