ASI 0600-1626 Inter-Lok Angle Frame Mirror
This 16" W x 26" H surface-mounted mirror uses plate glass in a roll-formed 18-gauge type 304 stainless steel angle frame measuring 3/4" x 5/8". The frame corners are heliarc welded, ground and polished smooth to a uniform satin finish. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a one-piece back plate is secured to the frame with a theft-resistant locking device.
Installation
Install the bracket level and plumb with #10 self-threading screws, which are by others. Hang the mirror on the bracket and tighten the locking screws at the top and bottom. The manufacturer advises that, for the cited 2010 ADA Accessibility Standards and 2015 ABA Standards, the bottom edge of the reflecting surface should be no higher than 40" above finished floor; this guidance is not a blanket compliance determination.
