ASI 0600-2616 Stainless Steel Inter-Lok Angle Frame Plate-Glass Mirror
The ASI 0600-2616 is a 26 in wide x 16 in high, surface-mounted plate-glass mirror. Its roll-formed 18-gauge Type 304 stainless steel frame has heliarc-welded corners polished to a uniform satin finish. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; the one-piece back plate attaches to the frame with a theft-resistant locking device.
Specifications
- Size: 26 in wide x 16 in high.
- Frame: 3/4 in x 5/8 in roll-formed, 18-gauge Type 304 (18-8) stainless steel.
- Standard plate-glass glazing: 1/4 in thick; warranted against silver spoilage for 15 years from the invoice date.
- Mounting: surface-mounted on a concealed hanging bracket; tamper-proof set screws secure the frame at the top and bottom.
- Back plate: one piece, attached to the frame with a theft-resistant locking device.
Installation
Install the bracket level and plumb using #10 self-threading screws (by others). Hang the mirror on the bracket and tighten the locking screws at the top and bottom. The manufacturer’s guidance citing the 2010 ADA Accessibility Standards and 2015 ABA Standards recommends placing the bottom edge of the reflecting surface no higher than 40 in above the finished floor. This guidance is not a determination that an installation complies with accessibility requirements.
