ASI 0600-2024 Inter-Lok Angle Frame Mirror, 20" W x 24" H
This surface-mounted plate-glass mirror has a roll-formed 3/4" x 5/8" 18-gauge Type 304 stainless steel angle frame. The frame corners are heliarc welded and polished smooth to a uniform satin finish. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a one-piece back plate attaches to the frame with a theft-resistant locking device.
Installation
Install the bracket level and plumb with #10 self-threading screws, which are by others. Hang the mirror and tighten the locking screws at the top and bottom. ASI's installation guidance for the 2010 ADA Accessibility Standards and 2015 ABA Standards states that the bottom edge of the reflecting surface should be no higher than 40" above the finished floor.
