ASI 0600-2022 Inter-Lok Angle Frame Mirror
This 20" W x 22" H surface-mounted mirror has plate glass and a one-piece back plate. Its 3/4" x 5/8" roll-formed, 18-gauge type 304 stainless steel angle frame has heliarc-welded corners polished smooth to a uniform satin finish. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a theft-resistant locking device attaches the back plate to the frame.
Installation
Install the bracket level and plumb using #10 self-threading screws, which are by others. Hang the mirror on the bracket and tighten the locking screws at the top and bottom. For manufacturer guidance on the 2010 ADA Accessibility Standards and 2015 ABA Standards, position the bottom edge of the reflecting surface no higher than 40" above the finished floor.
