ASI 0600-2216 Stainless Steel Inter-Lok Angle Frame Plate Glass Mirror
The ASI 0600-2216 is a 22" W x 16" H, surface-mounted plate glass mirror with a roll-formed 18-gauge Type 304 stainless steel interlocking angle frame. Its concealed hanging bracket locks to the frame at the top and bottom with tamper-proof set screws.
Key specifications
- Mirror: plate glass
- Frame: 3/4" x 5/8" roll-formed, 18-gauge Type 304 stainless steel with a uniform satin finish
- Frame corners are heliarc-welded and polished smooth
- One-piece back plate attaches to the frame with a theft-resistant locking device
- Mounting: surface-mounted concealed hanging bracket; installation screws are by others
Installation guidance
Install the bracket level and plumb using #10 self-threading screws (by others), hang the mirror, then tighten the locking screws at the top and bottom. ASI's installation guidance for the 2010 ADA Accessibility Standards and 2015 ABA Standards says the bottom edge of the reflecting surface should be no higher than 40" above the finished floor; this manufacturer guidance is not a determination of project compliance.
