ASI 0600-2020 Plate Glass Inter-Lok Angle Frame Mirror, 20" W x 20" H
The ASI 0600-2020 is a 20" W x 20" H surface-mounted plate glass mirror. Its roll-formed, 18-gauge Type 304 stainless steel angle frame has a 3/4" x 5/8" profile. The heliarc-welded corners are ground and polished smooth to a uniform satin finish.
Specifications and mounting
- Standard glazing is 1/4" #1 quality plate glass; the manufacturer warrants it against silver spoilage for 15 years from the invoice date.
- A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws.
- A one-piece back plate attaches to the frame with a theft-resistant locking device.
Install the bracket level and plumb using #10 self-threading screws (by others). Hang the mirror on the bracket and tighten the top and bottom locking screws. ASI’s installation guidance for the cited 2010 ADA Accessibility Standards and 2015 ABA Standards says the bottom edge of the reflecting surface should be no higher than 40" above the finished floor; this is not a project-specific compliance determination.
