ASI 0600-1620 Stainless Steel Angle Frame Mirror
This surface-mounted mirror measures 16 inches wide by 20 inches high and uses a plate-glass mirror in a 3/4-by-5/8-inch, 18-gauge Type 304 stainless steel angle frame with a satin finish. The frame corners are welded and polished smooth. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a one-piece back plate attaches to the frame with a theft-resistant locking device.
Installation
Install the bracket level and plumb using #10 self-threading screws, which are by others. Hang the mirror on the bracket and tighten the locking screws at the top and bottom. The manufacturer’s guidance for the cited accessibility standards places the bottom edge of the reflecting surface no higher than 40 inches above the finished floor; confirm placement for the applicable project requirements.
