ASI 0600-1624 Stainless Steel Angle Frame Mirror

This surface-mounted mirror measures 16" wide by 24" high and uses standard 1/4" plate glass. The frame is roll-formed 18-gauge Type 304 stainless steel angle, 3/4" x 5/8", with heliarc-welded corners ground and polished to a satin finish. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a one-piece back plate attaches to the frame with a theft-resistant locking device.

ASI 0600-1624 Mirror Spec Sheet

Mounting and placement

Install the bracket level and plumb using #10 self-threading screws, which are not included. Hang the mirror on the bracket and tighten the locking screws at the top and bottom. ASI’s guidance for 2010 ADA Accessibility Standards and 2015 ABA Standards specifies that the bottom edge of the reflecting surface be no higher than 40" above finished floor. The standard plate-glass mirror is warranted against silver spoilage for 15 years from invoice date.