ASI 0600-1636 Angle Frame Mirror
The ASI 0600-1636 is an angle frame mirror with a roll-formed, 18-gauge Type 304 stainless steel frame. The 3/4 x 5/8 inch frame has heliarc-welded corners ground and polished smooth to a uniform satin finish. A concealed hanging bracket locks to the top and bottom of the frame with tamper-proof set screws; a theft-resistant locking device attaches the one-piece back plate to the frame.
Mounting and placement
Install the bracket level and plumb using #10 self-threading screws (by others), hang the mirror, then tighten the locking screws at the top and bottom. ASI’s guidance for the 2010 ADA Accessibility Standards and 2015 ABA Standards is to position the bottom edge of the reflecting surface no higher than 40 inches above the finished floor. Confirm applicable project requirements for the installation.
