ASI 74022-BSM Double Surface-Mounted Toilet Tissue Holder
The ASI 74022-BSM is a bright-finish, surface-mounted double toilet tissue holder. It holds two standard-core rolls up to 6 inches in diameter. Its spring-loaded rollers revolve freely and hold rolls until the cores are removed.
Specifications
- Overall dimensions: 12-5/8 inches wide x 6-5/16 inches high x 2 inches deep.
- Construction: Type 304 stainless steel, alloy 18-8, with a bright finish.
- Rollers: chrome-plated, high-impact-resistant ABS plastic.
- Mounting: surface mounted; the manufacturer specifies two #10 screws (by others) long enough to penetrate wall blocking by approximately 1/2 inch.
- Optional theft-resistant spindle guard: Model R-009, ordered separately.
- Manufacturer-listed warranty: one year from date of invoice.
Mounting guidance
Locate the unit and transfer the hole positions to the wall. Drill two 7/32-inch clearance holes through tile or wallboard only, then fasten into blocking. The manufacturer also describes an optional drywall method using expansion anchors suited to the wall conditions; anchors and screws are by others. The manufacturer’s 2010 ADA installation guidance specifies the roller centerline at 19 to 42 inches above finished floor and 7 to 9 inches from the front of the commode. Confirm placement for the project and applicable requirements.
