ASI 7402-S Recessed Single-Roll Toilet Tissue Holder
The ASI 7402-S is a satin-finish, recessed holder for one standard-core toilet tissue roll up to 6 inches in diameter. Its Type 304 18-8 stainless steel construction and spring-loaded, chrome-plated ABS roller distinguish the specified configuration.
Capacity and installation
- Holds one standard-core roll up to 6 inches in diameter.
- Made of Type 304 18-8 stainless steel with a satin finish; the roller is chrome-plated, high-impact-resistant ABS plastic.
- The spring-loaded spindle revolves freely and holds the roll until its core is removed.
- Requires a rough wall opening of 5-1/2 inches wide by 5-1/2 inches high by 2 inches deep minimum.
- For standard drywall installation, use two #10 stainless steel screws (supplied by others) long enough to penetrate blocking by approximately 1/2 inch. The manufacturer specifies a continuous bead of silicone sealant behind the flange.
For manufacturer installation guidance referencing the 2010 ADA Accessibility Standards, position the roller centerline 19 to 42 inches above finished floor and 7 to 9 inches from the front of the commode. Confirm placement for the specific installation.
