ASI 7402-HS Recessed Single-Roll Toilet Tissue Holder with Hood
The ASI 7402-HS is a satin-finish recessed holder for one standard-core toilet tissue roll up to 6 in. in diameter. The hood and body are Type 304 stainless steel alloy 18-8; the spring-loaded spindle has a chrome-plated, high-impact-resistant ABS roller.
Product specifications
- Overall dimensions: 6-5/16 in. W x 6-5/16 in. H.
- Capacity: one standard-core roll up to 6 in. in diameter.
- Construction: Type 304 (18-8) stainless steel with a satin finish.
- The spring-loaded spindle revolves freely and holds the roll until its core is removed.
Recessed installation
Plan for a minimum rough wall opening of 5-1/2 in. W x 5-1/2 in. H x 2 in. D. Standard drywall installation calls for two #10 screws of suitable length into blocking and silicone sealant behind the flange; screws, blocking, and sealant are by others. The manufacturer also describes an optional anchor method for masonry substrates, with anchors and screws by others.
For its 2010 ADA installation guidance, the manufacturer specifies a roller centerline 19 in. to 42 in. above the finished floor and 7 in. to 9 in. from the front of the commode to the dispenser centerline. These are manufacturer installation guidelines, not a blanket compliance determination.
