ASI 7360-18B Square Towel Bar
The ASI 7360-18B is an 18-inch, surface-mounted square towel bar with a bright-finish Type 304 stainless steel rod. It projects 3-1/4 inches from the wall; choose this model for an 18-inch bright finish, or compare the other lengths and satin-finish options in the 7360 series.
Specifications and options
- 18 inches (457 mm) long; 3/4-inch (19 mm) square towel rod.
- Type 304 stainless steel with a bright finish; the -S models have a satin finish.
- Projects 3-1/4 inches (80 mm) from the wall.
- The series is also available in 24-inch (610 mm) and 30-inch (762 mm) lengths.
Mounting and care
Fasten the mounting plates through their holes with #10 self-threading screws into suitable prepared wall mountings, or use other suitable hardware selected for the wall conditions. Screws and mounting hardware are by others. Hang the post and flange assemblies on the plates with the bar captured, then tighten the setscrews. For general utility, the manufacturer specifies a 55-inch (1397 mm) AFF centerline for the mounting plates. The manufacturer also provides installation height guidance for specified forward- or side-reach conditions; verify the applicable requirements for the installation rather than treating those dimensions as a blanket compliance determination.
Clean regularly with a soft cloth and mild detergent, then rinse and dry. Avoid abrasive or caustic cleaners and muriatic acid.
