ASI 7340-S Single Robe Hook, Satin Stainless Steel
The ASI 7340-S is a surface-mounted single robe hook for robes, clothing, and small carry bags. Its Type 304 stainless steel satin finish distinguishes it from the bright-finish 7340-B, and the hook projects 2 inches (51 mm) from the wall.
Specifications
- Type 304 stainless steel with satin finish
- Overall dimensions: 2 inches (51 mm) wide × 2 inches (51 mm) high × 2 inches (51 mm) deep
- Single hook; surface mounted on a wall or the back of a door
- Manufacturer-stated warranty: one year from date of invoice
Mounting and installation guidance
Mount the plate with two #10 self-threading screws through the provided holes into suitable prepared mountings, or use other suitable hardware for the door or wall conditions. Screws and mounting hardware are by others. Hang the post and flange assembly on the plate, then tighten the set screw to lock it in place.
For general utility, ASI specifies a mounting-plate centerline height of 68 inches (1727 mm) above the finished floor (AFF). Its sheet gives accessibility installation guidance referencing ICC/ANSI A-117.1-2003 and the 2010 ADA Accessibility Standards: install with the top of the hook no higher than 48 inches (1219 mm) AFF for clear forward or side reach; no higher than 46 inches (1168 mm) AFF for side reach over an obstruction when reach depth is greater than 10 inches (254 mm) and less than 25 inches (635 mm); or no higher than 44 inches (1118 mm) AFF for forward reach over an obstruction when reach depth is greater than 20 inches (508 mm) and less than 25 inches (635 mm). Confirm the applicable project requirements and reach conditions.
