ASI 7303-S Satin-Finish Extra Roll Toilet Tissue Holder
The ASI 7303-S is a surface-mounted holder for one extra standard-core toilet paper roll up to 6 inches in diameter. It has a Type 304 stainless steel satin finish; the 7303-B is the bright-finish model.
Specifications
- Capacity: one standard-core roll up to 6 inches in diameter.
- Material and finish: Type 304 stainless steel, satin finish.
- Dimensions: 1 inch W x 5 inches H x 4-3/8 inches D.
- Construction: 22-gauge rectangular tubing.
Mounting and placement
Surface mount the plate using #10 self-threading screws (by others) through its provided holes into suitable prepared mountings or other suitable hardware for the wall. Hang the post and flange assembly on the plate and tighten the stainless steel set screw beneath the flange. Place one roll over the horn-type holder and replenish it as needed.
For general utility, the manufacturer recommends mounting the top of the post 32 inches above the finished floor. The manufacturer’s cited ICC/ANSI A117.1-2003 and 2010 ADA installation guidance specifies the top of the horizontal paper-holder arm at 19 to 40 inches above the finished floor, with the roll centerline no farther than 33 inches from the back wall behind the commode or 7 to 9 inches from the front of the commode. Confirm placement against project requirements.
Manufacturer-stated warranty: one year from the invoice date.
