ASI 64672-1 Simplicity Recessed 3-in-1 Paper Towel Dispenser, Hand Dryer and Waste Receptacle
The ASI 64672-1 is a recessed, 110–120V combination unit for restrooms needing a paper towel dispenser, automatic high-speed hand dryer and waste receptacle in one installation. It holds 500 standard multi-fold or 400 standard C-fold towels without an adapter and has a 6.8-gal (26 L) waste capacity.
Specifications and installation planning
- Overall dimensions: 15-3/8 in. W × 55-3/8 in. H × 7-1/2 in. D; minimum rough wall opening: 14-3/32 in. W × 54-3/8 in. H × 7-1/4 in. D.
- Construction: 20-gauge Type 304 stainless steel with a satin finish; recessed mounting.
- Electrical supply: 110–120V AC, 10.4 A, 1,000 W. Coordinate the service-cable rough-in with the manufacturer’s installation diagram; electrical service is supplied and connected by others before the cover is installed. Mounting screws are by others.
- Manufacturer’s installation guidance for the 2010 ADA Accessibility Standards specifies a maximum 48-in. AFF centerline for the towel dispenser outlet; confirm the installation requirements for the project.
- Manufacturer warranty: five years from invoice date.
The dryer starts when hands enter the marked sensor zone and runs while movement is sensed, up to a two-minute maximum; it automatically shuts off after its time-out once hands are removed. Towels are manually withdrawn through the slot and feed properly until depleted; the dispenser continues feeding when correctly reloaded with a partial load. Unlock and open the door to replace towels in an empty or partially empty dispenser. Replenish the towel supply and empty the waste container manually according to maintenance needs. The locking full-face door prevents unauthorized access or removal, and the waste receptacle’s spring-hinge flap helps prevent visible overloading.
