ASI 645210A-6 Simplicity™ Automatic Roll Paper Towel Dispenser
The ASI 645210A-6 is a semi-recessed, battery-powered dispenser for hands-free dispensing of owner-adjustable towel lengths. Its 6-inch collar accommodates semi-recessed installation, and it accepts rolls up to 8 inches wide and 800 feet long.
Key specifications
- Type 304 stainless steel with satin finish; 20-gauge construction.
- Overall dimensions: 16-1/16 inches W × 28 inches H × 9-1/2 inches D.
- Rough wall opening: 14-3/4 inches W × 26 inches H × 3-1/2 inches minimum depth.
- Powered by four D-size batteries, not included.
- Three three-position switches adjust towel length, delay, and economy; an LED indicates sensing and battery condition.
- One-year warranty from date of invoice.
Installation and refilling
Mount the unit in the wall recess through the concealed mounting holes with at least four #10 self-threading screws; screws are by others. ASI's installation guidance places the top of the towel opening at 48 inches maximum above finished floor only where the required forward- or side-reach access is provided. Local requirements may set a 40-inch maximum; for general utility, ASI gives a 49- to 56-inch range. Verify project and local requirements before installation.
When reloading with a full roll, transfer the remaining partial roll to the stub-roll position so dispensing can continue. Unlock the door to replace an empty or partially used roll; the locking door restricts unauthorized access and roll removal.
