ASI 3875-P Wall-to-Floor Grab Bar, 18" x 33"
The ASI 3875-P is an 18" x 33" wall-to-floor grab bar for installations that can accommodate its floor sleeve and wall anchoring. The 1-1/2" O.D. Type 304 stainless steel tube has a peened surface, while the satin snap-on cover conceals the wall mounting screws.
Specifications
- 18" x 33" wall-to-floor configuration with 1-1/2" O.D., 18-gauge Type 304 stainless steel tubing.
- Peened surface; the manufacturer identifies the -P suffix as the optional non-slip surface.
- Concealed mounting flange is 1/8" thick and 3-1/8" O.D., with two screw holes and three locking dimples.
- Type 304 satin-finish snap cover is 22 gauge and 3-3/16" in diameter.
- Manufacturer’s configuration drawing shows a 3" projection below the finished floor and calls for a contractor-provided floor sleeve, 3" long, sized to accept the bar O.D.
Installation considerations
Plan the floor sleeve and wall backing before finishing the wall. The manufacturer specifies two #10 self-tapping pan-head screws and flat washers, or another suitable fastener system, for each flange; fasteners are by others. Provide appropriate anchoring and backing in accordance with local codes or project plans.
